Category: VIM Training, User Groups, and Webinars

Data collection and reporting to meet emission regulations defined by the NESHAPS/MACT Rules can be challenging. Unlike NSPS, Acid Rain and other air compliance programs, NESHAPS brings in a mix of continuous and periodic data collection requirements coming from CEMS, CPMS and plant information systems. The raw data needed to meet compliance often come from different sources within the facility, on different networks, found in incompatible formats and different software platforms. This webinar will explainRead more »

The 2019 User Group is just around the corner! Get ready by taking an early look at the schedule, presentations, events, and more going on throughout the week below:

Read more »

We’re committed to making the 2019 VIM User Group the best place to learn how to get the most out of CEMLink6, network with other professionals, and refresh your industry knowledge. Our vendors contribute to this goal, and elevate the event by providing a high level of knowledge, expertise, and professionalism. We’d like to thank the following vendors for participating in this year’s User Group:

Read more »

CEMLink6 is incredibly useful for any organization that’s looking to collect and report on their emissions data. Track I of the 2019 VIM User Group is geared towards helping newer users understand everything from the user interface to reporting and regulations. Here are the classes that are available in Track I:

Orientation to a CEMLink6 DAS

If you’re a plant technician or environmental support staff responsible for CEMS/DAS systems, this class is for you! We’ll talk about the reasons you’ll need a standalone data acquisition system, then break down each component of the DAS build process. Each user interface we discuss will be from an introductory perspective.

Read more »

We’re offering a wide variety of training opportunities at the 2019 VIM User Group in Sheraton Music City Hotel in Nashville, TN. There are eight (8) brand new classes along with refreshed/updated content in the remainder. Come witness firsthand what new tools are available to you in CEMLink6. Sessions available in Track II are:

Calibration Utilities

If you’re a technician or environmental engineer responsible for managing CEMS ongoing quality assurance requirements, you may want to attend our Calibration Utilities course. This course covers every aspect of the Cylinder Management, Calibration Control, and Calibration Data Viewer user interfaces.

Read more »

The 2019 VIM User Group is a great opportunity to get training on the CEMLink 6 software. If you already have a lot of experience with CEMLink 6, you may find it difficult to decide what sessions – if any – would be an effective use of your time. The sessions in Track III are carefully crafted for advanced users like you, with information on tips, tricks, and features that will make you more effective in your day-to-day job. Here are some of the sessions that are available in Track III:

Advanced Tips-n-Tricks

Our new Advanced Tips and Tricks session covers a variety of features within CEMLink 6, as opposed to just one feature. We’ll focus on showing off lesser known tips, tricks, and features that will help you become a more productive and efficient user. This session is perfect for users who want to become well-rounded, or don’t know which of our advanced sessions to attend.

Read more »

Our Mini User Group and Training in Grapevine, TX is less than a month away! If you have not already done so, please register here. The event will take place February 5-7 and will feature a variety of classes:

Read more »

The VIM Technologies team will be hosting a Mini User Group and CEMLink6/Regulatory Training in Grapevine, Texas. Join us at the Hilton DFW Lakes Executive Conference Center from February 5-7, 2019 for a three-day event of industry education and training.

What is the schedule?

• Tuesday, February 5 | Mini User Group (1-5pm) and Reception (6-9pm)
• Wednesday, February 6 | Day 1 Training (Full Day)
• Thursday, February 7 | Day 2 Training (Full Day)

Read more »

A special thanks to those who were able to attend the recent training event in Baltimore, MD.  We are excited to report we had a record number (48) of attendees who were able to take advantage of the various class offerings. 

We’re pleased to announce a “Save-the-date” for our next upcoming training event to be held February 5-7, 2019 in Dallas, TX.  Similar to Baltimore, we’ll be offering both CEMLink6 and regulatory training.  Be on the lookout for the official registration announcement in the coming weeks, and mark your calendars!