Electric Generation
Electric Generation

Electric Generation

VIM Technologies, Inc. has experience with many different electric generation applications including coal fired, combined cycle gas turbines, simple cycle gas turbines, and biomass.

Our experience in electric generation applications is diverse and extensive. We are fluent with the Acid Rain Program (ARP), Cross-State Air Pollution Rule (CSAPR), and State Implementation Plan (SIP) regulations required under 40 CFR 75. For those sources subject to the Mercury and Air Toxics Standards (MATS) rule required under 40 CFR 63, Subpart UUUUU, we are prepared to help you report. With dedicated engineers on staff always current with the regulatory requirements of Part 75 and Part 63, we are ready to help you navigate the rules.

CEMLink 6 has all the tools you need to compile and submit your data to comply with all of the complex reporting requirements. Data substitution is built in and automatic, and is even ready to use for any Part 60 applications that require it. In addition to Part 75 Compliance Tools have all been designed by our in-house environmental engineers to help you get the answers you need to compile and submit quarterly reports. With our industry leading technical support team, any electric utility can rely on us to be their partner in compliance.

Featured News

What’s New In CEMLink6 — August 2024

August 21, 2024

We have some CEMLink6 news for you! Before we move further into August and forget Christmas in July, VIM Technologies is thrilled to announce a range of top-notch features we’ve rolled out in CEMLink6. We understand that today’s requirements and trends are evolving rapidly, and our dedicated development team is here to meet those challenges […]

Read Post

ECMPS 2.0 Update

July 23, 2024

The ECMPS 2.0 launch date continues to be postponed indefinitely, and EPA has stated that it will not be rolled out in calendar year 2024.  Additionally, on June 3, 2024, EPA’s Clean Air and Power Division (CAPD) announced that the ECMPS 2.0 Beta and CBS Beta systems were going offline for several weeks due to […]

Read Post

Part 75 Desk Audit Update

June 26, 2024

The Clean Air & Power Division (CAPD), formerly known as the Clean Air Markets Division (CAMD), continues to conduct virtual Part 75 continuous emission monitoring system (CEMS) program audits referred to as “Part 75 Desk Audits.” Initially, the Desk Audits primarily focused on coal-fired units equipped with full CEMS. Part 75 Desk Audits are conducted […]

Read Post

Part 75 ECMPS Re-Engineering Update

March 1, 2024

On February 6, 2024, the EPA’s Clean Air Markets Division (CAMD) hosted a webinar to discuss modifications to the existing ECMPS 1.0 Client Tool to accommodate the Good Neighbor Rule and MATS Rule electronic reporting requirements that became effective January 1, 2024.  The deadline for implementing ECMPS 2.0 continues to be postponed indefinitely.  Indications are […]

Read Post

ECMPS 2.0 Start Date Postponed

November 17, 2023

UPDATE: ECMPS 2.0 Start Date Postponed On November 15, 2023, the EPA’s Clean Air Markets Division (CAMD) hosted a webinar to discuss transitioning from ECMPS 1.0 (i.e., the ECMPS Client Tool) to the new web-based ECMPS 2.0 reporting platform. During the webinar, CAMD announced that ECMPS 2.0 would not be used to report quarterly QA […]

Read Post

Recap of the 2023 VIM User Group and Training Event

November 3, 2023

We are thrilled to take you through the highlights of the 2023 VIM User Group and Training event, held at the beautiful Marriott Phoenix Resort Tempe at The Buttes in Tempe, Arizona from October 24 to 27, 2023. This event brought together VIM end-users for two days of in-depth product and regulatory training. It also […]

Read Post

EPA Administrator Signs Final Federal “Good Neighbor Plan” for the 2015 Ozone National Ambient Air Quality Standards

June 7, 2023

UPDATE: EPA Publishes Final Good Neighbor Plan In Federal Register On June 5, 2023, EPA published the final Federal “Good Neighbor Plan” for the 2015 Ozone National Ambient Air Quality Standards in the Federal Register.  The rule effective date is August 4, 2023.  A copy of the Federal Register version of the final rule is available […]

Read Post

Discover the New LME EDR Tool for ECMPS 2.0 by VIM Technologies

April 26, 2023

Beginning in the first quarter of 2024, Part 75 sources will be required to report their Electronic Data Reports (EDRs) using the new web-based ECMPS 2.0 platform. This change means that the original ECMPS standalone client tool will no longer be an option for reporting EDRs. This can create some challenges for organizations that need […]

Read Post