VIM Environmental Compliance Expert

ERIC WILEY

INSTRUCTOR

Eric Wiley, Senior Air Compliance Specialist, will serve as the instructor for this course. He has over 22 years of air quality experience serving a wide variety of industrial sources. Prior to joining VIM Technologies in July 2019, Eric worked as a Managing
Consultant, CEMS Business Line Leader at Trinity Consultants for over 7 years. He has developed and presented numerous site-specific training courses.

List of Relevant Training Experience

  • CEMS Program Essentials and Best Practices. Lead Instructor, 4C Conference August 19, 2021 
  • Overview of SCAQMD New CEMS Rules 218.2 and 218.3. Lead Instructor, VIMTechnologies webinar. July 28, 2021.
  • Part 60 CEMS and COMS Online Training Course.
    Co-instructor, VIM Technologies.February 16 – 18, 2021.
  • Managing Air Compliance for Refineries.
    Instructor, VIM Technologies webinar. May 25, 2021.
  • CEMS QA- QC Plan Fundamentals. Co-instructor, VIM Technologies webinar. July 21, 2020.
  • Common DAHS-CEMS Audit Findings. Instructor, 4C Conference, February 20, 2020.

Featured News

ECMPS 2.0 Rollout Delayed to 2026 What You Need to Know

ECMPS 2.0 Rollout Delayed to 2026: What You Need to Know

April 23, 2025

On April 22nd, 2025, EPA’s Clean Air and Power Division (CAPD) provided a status update on the ECMPS 2.0 re-engineering effort. The blog post can be found here. The key takeaway from the message is the delay for ECMPS 2.0 implementation until at least Q1 2026 (from Q3 2025). This announcement didn’t take us by surprise […]

Read Post

President Signs Proclamation Granting MATS Rule Exemption For Certain Sources

April 18, 2025

On Tuesday, April 8, 2025, the President issued a Presidential Proclamation exempting specified stationary sources, listed in Annex I of the Proclamation, from compliance with the “National Emissions Standards for Hazardous Air Pollutants: Coal- and Oil-Fired Electric Utility Steam Generating Units Review of the Residual Risk and Technology Review” (89 Federal Register 38508) (the “Rule”).  […]

Read Post
ECMPS 2.0 Update: EPA Announces Q3 2025 Rollout and Key Changes

ECMPS 2.0 Update EPA Announces Q3 2025 Rollout and Key Changes

January 23, 2025

On December 20th, 2024, EPA’s Clean Air and Power Division (CAPD) provided a status update on the ECMPS 2.0 re-engineering effort. The blog post can be found here. Their message addressed the following three (3) key points: Copies of the ECMPS 2.0 monitoring plan, quality assurance and emissions reporting instructions were posted. They confirmed that […]

Read Post

What’s New In CEMLink6 — August 2024

August 21, 2024

We have some CEMLink6 news for you! Before we move further into August and forget Christmas in July, VIM Technologies is thrilled to announce a range of top-notch features we’ve rolled out in CEMLink6. We understand that today’s requirements and trends are evolving rapidly, and our dedicated development team is here to meet those challenges […]

Read Post

Part 75 Desk Audit Update

June 26, 2024

The Clean Air & Power Division (CAPD), formerly known as the Clean Air Markets Division (CAMD), continues to conduct virtual Part 75 continuous emission monitoring system (CEMS) program audits referred to as “Part 75 Desk Audits.” Initially, the Desk Audits primarily focused on coal-fired units equipped with full CEMS. Part 75 Desk Audits are conducted […]

Read Post

Part 75 ECMPS Re-Engineering Update

March 1, 2024

On February 6, 2024, the EPA’s Clean Air Markets Division (CAMD) hosted a webinar to discuss modifications to the existing ECMPS 1.0 Client Tool to accommodate the Good Neighbor Rule and MATS Rule electronic reporting requirements that became effective January 1, 2024.  The deadline for implementing ECMPS 2.0 continues to be postponed indefinitely.  Indications are […]

Read Post

ECMPS 2.0 Start Date Postponed

November 17, 2023

UPDATE: ECMPS 2.0 Start Date Postponed On November 15, 2023, the EPA’s Clean Air Markets Division (CAMD) hosted a webinar to discuss transitioning from ECMPS 1.0 (i.e., the ECMPS Client Tool) to the new web-based ECMPS 2.0 reporting platform. During the webinar, CAMD announced that ECMPS 2.0 would not be used to report quarterly QA […]

Read Post

Recap of the 2023 VIM User Group and Training Event

November 3, 2023

We are thrilled to take you through the highlights of the 2023 VIM User Group and Training event, held at the beautiful Marriott Phoenix Resort Tempe at The Buttes in Tempe, Arizona from October 24 to 27, 2023. This event brought together VIM end-users for two days of in-depth product and regulatory training. It also […]

Read Post